Table of content

Introduction

The audio [Mixer] is the number one feature in Jamzone.

Each audio components of the song is recorded, in-studio, on its own track to give you complete and instantaneous control on its volume so you can create the perfect mix of instruments and vocals that will back you up. It’s a complete band in your pocket.

Metronome Click Track

The [Click] and [Pre-count] track on the left side to control the metronome click sound to help you get started and stay in beat.

• [Mute] button to turn ON/OFF the volume of the track
• [Pre-count] button to turn the pre-count volume ON/OFF

Instrument & Vocal Tracks

Each track in the [Mixer] is composed of:

• a [Fader] to control the track volume from 0% to 100%. Use this to remix the song to your taste.
• a [Mute] button to turn ON/OFF the volume of the track. Mute any track you want to play yourself or remove from the output.
• a [Solo] button with the instrument icon. Use it to temporarily isolate the sound of the track to listen to. Un-solo to restore the previous state of your mix.

If several (or all) tracks are selected as "solo", it can cause issues like mixer changes not saving properly, or the inability to solo tracks.

💡If you ever feel stuck in one of these modes you must reset your mixer settings to default value, here’s how to fix it:

• To resolve this, open the affected song and tap the tracks displayed in green once to remove the solo effect. No track should remain green.
• From there, you can use the "M" button to mute tracks and achieve the mix you need.

Master track

a [Master] volume track on the right side to let you control the overall volume of the song and harmonise the levels within a setlist.

• [Airplay] button, to stream the audio and/or the screen to compatible devices.

Audio input (Apple only)

Record a jam session that includes your voice input from your device's built-in microphone, or any microphone and instrument input using an appropriate audio interface.

Device internal microphone

1. To enable audio inputs in the mixer, tap on the "Inputs" button in the mixer control panel.

   

2. Authorize Jamzone to access your microphone.

   

<aside> ⚠️ To prevent any audio feedback loop resulting in a Larsen effect, you must connect headphones to use your device's internal mic.

</aside>

Audio interface

1. Connect a compatible audio interface to your device.

2. To enable audio inputs in the mixer, tap the "Inputs" button in the mixer control panel.